|

Click here for larger image.
|
Specifications
 |
This kit is set up to replace
your current pump on your E-100 sprayer with a 3.3
GPM pump increasing flow and raising nozzle pressure. |
 |
Use this replacement pump to
apply zone marking paint to stripe parking lots. |
 |
Kit Includes: |
| |
| * |
Shur-Flo 2088-343-500 Pump
(P/N 100-159-030) |
| * |
2 90° Fittings |
| * |
Drill Template |
| * |
2 Hose Clamps |
| * |
¼" Drill Bit |
|
 |
Tools Required: |
| |
| * |
Drill |
| * |
Utility Knife |
| * |
3/8" Wrench |
| * |
Flat Head Screw Driver
|
| * |
Allen Wrenches From Tool
Kit |
|
 |
Instructions: |
| |
| 1. |
Remove old pump:
Unfasten pump leads from terminal block under
sprayer. Remove hoses - cut up from permanent
clamps if needed. Loosen mount bolts and remove
pump. |
| 2. |
Drill new mount holes:
Bolt "X" holes of drill template with existing
bolts to holes closest to the battery box.
The new holes will position new pump away
from battery box. Drill new holes with provided
drill bit. |
| 3. |
Mount new pump:
Fasten provided 90° fittings to new pump.
Fasten existing return line fitting to new
pump. Mount new pump to new hole locations
using existing bolts. Fasten hoses onto fittings
using provided hose clamps. Fasten pump leads
back into terminal block under sprayer. Black
to Black - Red to open terminal. |
|
|